Specifications - Toro 41198 Multi-Pro 1250 Operator's Manual

setting, without affecting the Total Volume display.
If you press the Reset calibration button, the Sub
Area resets.
• Total Volume
Displays the total volume in US gallons (US and
TURF) or liters (SI) that you have applied since you
last pressed the Reset calibration button for this
setting.
Calibration Buttons
The monitor has the following buttons:
• Reset
Resets the Total Volume, Sub Volume, Distance,
Total Area, and Sub Area display settings to 0.
• Calibrate
Used to enter and exit the calibration mode.
• Decrease
Reduces values displayed on the screen during
calibration.
• Increase
Increases values displayed on the screen during
calibration.
Calibration Settings
• Boom Width
• Units of Measure
• Speed/Distance
• Flowmeter

Specifications

Note: Specifications and design are subject to change
without notice.
Base weight
Weight with standard spray
system, empty, without
operator
Weight with standard spray
system, full, without operator
Maximum gross vehicle weight
(GVW) (on level ground)
Tank capacity (includes the CE
5% overflow)
Overall width with standard
spray system booms stored in
the X position
Overall length with standard
spray system
Overall height with standard
spray system
Overall height with standard
spray system to the top of the
booms stored in the X position
Ground clearance
Wheel base
Optional Equipment
The Toro Company has optional equipment and
accessories that you can purchase separately and install
on your sprayer. Contact your Authorized Service
Dealer for a complete list of optional equipment that is
currently available for your sprayer.
24
2,061 lb (934 kg)
2,061 lb (934 kg)
3,661 lb (1,660 kg)
4,163 lb (1,888 kg)
175 US gallons (662 L)
69 inches (175 cm)
133 inches (337 cm)
52 inches (132 cm)
91 inches (231 cm)
4.5 inches (11.4 cm)
62 inches (157 cm)