Operation; Think Safety First; Controls - Toro Z200 Z Master 74233 Operator's Manual

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Think Safety First

Please read all safety instructions and symbols in the
safety section. Knowing this information could help you,
your family, pets or bystanders avoid injury.
The use of protective equipment for eyes, ears, feet, and
head is recommended.
Caution
This machine produces sound levels in excess of
85 dBA at the operators ear and can cause
hearing loss through extended periods of
exposure.
Wear hearing protection when operating this
machine.
Figure 9
1. Warning—wear hearing protection.

Controls

Become familiar with all the controls (Fig. 10) before you
start the engine and operate the machine.
7
4
Figure 10
1. Ignition switch
2. Motion control lever
3. Parking brake lever
4. Throttle
5. Choke
Using the Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running. Use
these times for scheduling regular maintenance.
Figure 11
1. Hour meter
Switching Fuel Tanks
The unit has two fuel tanks, located on the left and right
sides. Each tank connects to the fuel shut off valve in the
control panel. From there a common fuel line leads to the
engine (Fig. 12).
To use the right side fuel tank rotate the fuel shut off valve
1/4 turn to the right from the off location. This uses fuel
from the right side tank only. When the right hand fuel
tank is empty, move the fuel shut off valve 1/4 turn to the
left from the off position.
18
8
3 1 6
2
5
10
9
M–4507
6. Power take off (PTO)
7. Height-of-Cut lever
8. Fuel cap
9. Fuel shut off lever
10. Hour meter
1
m–3077