Watching Tv Programmes; Selecting The External Input Source To View - Toshiba 32P2400 Series Owner's Manual

Watching TV programmes

Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using PU
or Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
NOTE:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be displayed.
Each time you press
forth between the two positions.
Displaying the on-screen information
1
Press to display the following on-screen
information.
4
ABCD
The information will disappear in several
seconds.
To erase the display instantly, press
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press  or  to select
Manual Tuning menu, and then press OK.
, the TV will switch back and
Stereo
again.
2
Press  or  to select the channel ABCD, then
press .
Manual Tuning
Pos.
0
1
2
3
4
5
6
7
3
Press  to select the new position "4", then
press .
4
Press  to select the channel MNOP, then press
.
5
Press  to select the new position "1", then
press .
6
Confi rm new Manual Tuning menu.

Selecting the external input source to view

1
Press o on the remote control until the
external input mode list appears on the screen,
then press ,  or o to select appropriate
input source.
2
Press OK.
VIDEO (o standard video input) ,
HDMI (HDMI input)
NOTE:
If the Inputs list is displayed by pressing p / o and U
or u on the left side of the TV and U or u, the options
are VIDEO/HDMI/TV.
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1
From the PREFERENCES menu, press  or 
to select Input Labelling and then press OK.
2
Press  or  to select the item you want to
label and press  or  to select --, Amplifi er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
– 13 –
Label
ABCD
EFGH
IJKL
MNOP