Watching Tv Programmes; Selecting The External Input Source To View - Toshiba 24P1300 Series Owner's Manual

Watching TV programmes

Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using PU or
Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be displayed.
Each time you press
forth between the two positions.
Displaying the on-screen information
1
Press to display the following on-screen
information.
4
ABCD
The information will disappear in 6 seconds.
To erase the display instantly, press
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press  or  to select
Manual Tuning menu, and then press OK.
2
Press  or  to select the channel ABCD, then
press .
242932P1300Series̲En.indd 11 242932P1300Series̲En.indd 11
, the TV will switch back and
Stereo
again.
– 11 –
Manual Tuning
Pos. Label
0
1 ABCD
2 EFGH
3 IJKL
MNOP
4
5
6
7
3
Press  to select the new position "4", then
press .
4
Press  to select the channel MNOP, then press
.
5
Press  to select the new position "1", then
press .
6
Confi rm new Manual Tuning menu.

Selecting the external input source to view

1
Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
2
Press OK.
TV (analogue aerial input),
VIDEO (o, standard video input),
HDMI (HDMI input)
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1
From the PREFERENCES menu, press  or  to
select Input Labelling and then press OK.
2
Press  or  to select the item you want to
label and press  or  to select --, Amplifi er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
2013/04/08 10:07:04 2013/04/08 10:07:04