Controls And Displays; Remote Control - Pioneer XW-NAS5 Operating Instructions Manual

Controls and displays

Chapter 2:
Controls and displays

Remote control

STANDBY/ON
1
SOUND
ON/
SCAPE
OFF
2
SELECT
PRESET
3
4
WAKE
SLEEP
UP
5
CLOCK SETUP
6
 STANDBY/ON
1
Switches the unit between standby and on.
2 Soundscape function/operation buttons
Use to turn the Soundscape (environmental
sound) function ON/OFF, and to switch
between settings (page 18).
3 PRESET +/–, Playback control buttons
Use to select preset radio stations (page 17).
Use when operating an iPod or Bluetooth
wireless technology device with this remote
control (page 11, 15).
4 BASS/TREBLE
Use the bass and treble controls to adjust the
overall tone.
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT,
7
INPUT
VOLUME
8
MIX BALANCE
PRESET
9
ENTER
TUNE
BASS/
TREBLE
10
TUNE
TUNER
PRESET
5 SLEEP
Use to put the unit in sleep mode and
select the amount of time before sleep
(page 21).
WAKE UP
Use to turn the wake-up timer function ON/
OFF (page 21).
CLOCK
Use to switch the clock display functions
(page 20).
6 SETUP
Press to make various settings.
7 INPUT
Use to select an input source. Press repeatedly
to switch between iPod, tuner, Bluetooth
1
ADAPTER and external input.
8 VOLUME +/–
Use to set the listening volume.
9 ENTER
10 TUNE +/–
Use to find radio frequencies (page 17).
TUNER PRESET
Use to store preset radio stations in
memory, and to call them from memory
(page 17).
cannot be selected even if INPUT is pressed.
02
7
En