Using The Memory Function; Averaging Function; To Display The Measurement Values - Omron INTELLI SENSE HEM-711AC Instruction Manual

USING THE MEMORY FUNCTION

The monitor is designed to store the blood pressure and the pulse rate in
the memory every time a measurement is completed.
The monitor automatically stores up to 60 sets of measurement values
(blood pressure and pulse rate). When 60 sets of measurement values are
stored, the oldest record is deleted to save the most recent values.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
NOTE: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement value. If one set of measurement values is stored,
this is displayed as the average.

TO DISPLAY THE MEASUREMENT VALUES

1. Press the MEMORY button.
The Average Symbol ( ) appears on the display when the average
reading is shown.
STOP
28