Error Indicators And Troubleshooting Tips - Omron ReliOn HEM-741CREL Instruction Manual

Automatic inflation blood pressure monitor
Hide thumbs Also See for ReliOn HEM-741CREL:
Table of Contents

Advertisement

Available languages

Available languages

SYMBOL
Blinking or Steady
TROUBLESHOOTING TIPS
PROBLEM
No power.
No display appears on the unit.
Measurement values appear too
high or too low.
ERROR INDICATORS
CAUSE
Cuff
under-inflated.
Cuff
over-inflated.
Movement
during
measurement.
Batteries
are worn.
CORRECTION
Remove the arm cuff. Read,
"Taking a Measurement" on page 15.
Wait 2-3 minutes.Take another
measurement.
Remove the arm cuff.
Wait 2-3 minutes.Take another
measurement and remain still until the
measurement is complete.
Replace the four batteries. Refer to
page 8 for battery installation.
CAUSE AND SOLUTION
Replace worn batteries.
Check the battery installation
for proper placement of the
battery polarities.
Blood pressure varies constantly.
Many factors including stress,
time of day, how you wrap
the cuff, may affect your blood
pressure. Review the sections
"Before Taking a Measurement"
and "Taking a Measurement".
21

Advertisement

Chapters

Table of Contents
loading

Table of Contents