Kenwood DDX6034 Service Manual page 23

For DVD audio checking.
Title Chapter
4 1 1kHz, 0dB
4 6 17Hz
4 15 20kHz
4 2 Infi nity
4 3 L
4 4 R
4 1 1kHz, 0dB
4 2 Infi nity
Table 2.4.6-2 DVD Audio check
2.4.7. iPod
• For in the Test mode only, add the [V-Play] key to the [Multi
Function] key of the iPod source control screen.
[V-Play] key operation specifi cations
This key is used to play back the Video contents in the
iPod with one operation.
Pressing the [V-Play] key executes a series of following
operations.
q Turning On the [Video] key on the iPod Source Control
screen.
w Select "Movie" on the Video Contents List screen.
e Select the top fi le. (start to play back)
• Authentication operation check of the authentication chip
Connecting iPod will perform authentication operation
check of the authentication chip.
All the screens
When connecting iPod · · ·
Figure 2.4.7 Authentication operation check results
It is possible to judge as OK within 5 seconds in normal op-
eration.
* Select black for the background color until "Chip OK/NG"
is displayed.
Modify the background color to blue at the same time as
"Chip OK" is displayed.
Modify the background color to red at the same time as
"Chip NG" is displayed.
In the case that this check is always performed in the pro-
duction process, the [iPod] key on the Test Mode Main
screen is not necessary.
TEST MODE
Audiostream
PCM48k/24bit Audiostream2
PCM48k/24bit Audiostream2
PCM48k/24bit Audiostream2
PCM48k/24bit Audiostream2
PCM48k/24bit Audiostream2
PCM48k/24bit Audiostream2
Dolby Audiostream1
Dolby Audiostream1
iPod Chip Check
Chip OK/NG
Return
DDX6034/6034M/6054/7034BT/7034BTM/714
DNX7000EX/7140/7240BT/7340BT
2.4.8. TV
For in the case that the connected TV Tuner Box is the E
destination only, modify the setting as described in Table
2.4.8.
Item
Band TV1
Area4 (When connecting to KTC-V300E)
Area
Area5 (When connecting to KTC-V500E)
Channel Channel 8
Table 2.4.8 TV Test mode
2.4.9. Audio
The settings in the Test mode are described in Table 2.4.7-1.
(The settings of items which are not listed in the table are as
usual.)
5.1ch
DSP Model
Volume Step30
Loudness -
Bass Boost -
EQ (Tone ) Flat
SystemQ Ex -
Surround Bypass + Center
Subwoofer ON
Center Speaker ON
SRS WOW OFF
Space Enhancer -
Line Mute ON
DSP ON/OFF ON
Table 2.4.7-1 Test mode defaults
The key operation in the Test mode is described in Table
2.4.7-2. (The settings of items which are not listed in the
table are as usual.)
5.1ch
DSP Model
With one click
Balance
Left↔Center↔Right
With one click
Fader
Front↔Center↔Rear Front↔Center↔Rear
X'over With one click
FREQ MIN↔MAX
EQ (Tone) With one click
Level MIN↔0↔MAX
Having key on
DSP
the Audio Setup
ON/OFF
screen
Table 2.4.7-2 Test mode key operation
Setting
Simplifi ed Model
DSP Model without DSP
Step30 Step30
- OFF
OFF -
Flat Flat
- OFF
- -
ON ON
- -
- -
OFF -
ON ON
OFF -
Simplifi ed DSP Model without
Model DSP
With one click With one click
Left↔Center↔Right Left↔Center↔Right
With one click With one click
Front↔Center↔Rear
With one click With one click
MIN↔MAX MIN↔MAX
With one click With one click
MIN↔0↔MAX MIN↔0↔MAX
Having key on
the Audio Setup -
screen
23