Kenwood DDX6034 Service Manual page 15

Direct
Information Service
Select
Source/
Audio/
setup
DVS8000 Tuner Mute
Serial
Adjust Level
E2PROM E2PROM
Write Write
Focus
Offset
Inner Limit
Height
Cancel
Adjust Adjust Adjust
OK/NG OK/NG OK/NG
2.3. Specifi cation of screens
This section describes the Test mode functions available
in each screen. (The screen layout may differ from the real
system.)
2.3.1. Test Mode Main screen
This section describes the keys that can be used to transfer
to each screen.
Contents of the display shown in the Test Mode Main
screen are described in Figure 2.3.1-1.
Test Mode Main
Information Touch
Service Illumi
Ext SW
Direct Select Tilt Mecha
Figure 2.3.1-1 Test Mode Main screen
TEST MODE
Touch Illumi iPod
Touch
Step1 iPod Check
Adjust
E2PROM Adjust
Step2
Write OK/NG
Step3
E2PROM
Write
Auto1
Auto All
E2PROM E2PROM
Write Write
Figure 2.2 Screen transition
LCD
PWR FRQ
iPod Navigation
Bluetooth
DDX6034/6034M/6054/7034BT/7034BTM/714
DNX7000EX/7140/7240BT/7340BT
Test Mode Main
Power
LCD
Frequency
Inverter &
DC/DC
Auto2 Auto3
E2PROM E2PROM
Write Write
Key Specifi cation
Information : Transfer to Information screen.
Service : Transfer to Service screen.
Ext SW : Waveform output for Ext SW inspection.
Direct Select : Transfer to Direct Select screen.
Touch : Transfer to Touch Adjust screen.
Illumi : Transfer to llumi Adjust screen.
iPod : Transfer to iPod Authentication Chip Con-
fi rmation screen.
Tilt Mecha : Transfer to Tilt Mecha Position Adjust-
ment screen.
LCD : Transfer to the LCD Adjustment screen.
PWR FRQ : Transfer to the X35 Power Frequency
Confi rmation screen.
Navigation : Transfer to Navigation Update Confi rma-
tion screen.
Bluetooth : Transfer to Bluetooth Confi rmation screen.
This key turns red after the completion of
Flash memory initialization in Bluetooth
Module.
Tilt Mecha Bluetooth Ext SW
Mecha
LOOPBACK
Adjust
E2PROM Parrot
Write Check
Auto4
Flicker
E2PROM E2PROM
Write Write
Navigation
Navigation
Check
15