Starting The Engine; Adjusting The Handle Height - Toro 20794 Operator's Manual

Note: To raise the mower, move all 4 cutting height
levers forward; to lower the mower, move them all
rearward (Figure 11).

Adjusting the Handle Height

You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 12).
1. Handle lock
Figure 11
Figure 12
2. Handle positions

Starting the Engine

1. Pull the blade control bar to the handle (Figure 13).
2. Turn the ignition key (model 20796 only) (Figure 14)
or pull the recoil start handle (Figure 15).
Note: If the mower does not start, contact an
Authorized Service Dealer.
9
Figure 13
Figure 14
Figure 15