Table of Contents
Advertisement
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 6). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
4
Charging the Battery
No Parts Required
Procedure
Model 20796 only
Refer to Charging the Battery in the Maintenance
section.
Product Overview
1. Cutting height lever (4)
2. Spark plug
3. Air filter
4. Fuel tank cap
5. Oil fill/Dipstick
6. Discharge deflector
7. Recoil start handle
1. Grass bag
2. Side discharge chute
Specifications
Model
Weight
20794
96 lb
(44 kg)
20796
96 lb
(44 kg)
7
Figure 7
8. Blade control bar
9. Upper handle
10. Electric starter (model
20796 only)
11. Grass bag
12. Battery (model 20796
only)
13. Washout port
Figure 8
3. Battery charger (model
20796 only)
4. Rear discharge plug
(installed)
Length
Width
Height
65 in
22 in
(165 cm)
(56 cm)
(104 cm)
65 in
22 in
(165 cm)
(56 cm)
(104 cm)
41 in
41 in
Advertisement
Table of Contents
