About Rds Broadcasting - Samsung HT-J5150 User Manual

If you remove the USB device or Power Cable
✎
during the recording process, the portion of
the file which has already been recorded may
not play back.
Recording will not start if the remaining free
✎
space in the USB storage device is less than
2MB.
If the USB device is removed or has insufficient
✎
space (under 2MB), the appropriate message
is displayed and the recording stops.

About RdS Broadcasting

Using the RdS (Radio data System) to receive
FM stations
RDS allows FM stations to send an additional signal
along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
description on RdS function
PTY (Program Type) : Displays the type of program
●
currently being broadcast.
PS NAME (Program Service Name) : Indicates the
●
name of broadcasting station and is composed of
8 characters.
RT (Radio Text) : Decodes the text broadcast by a
●
station (if any) and is composed of maximum 64
characters.
CT (Clock Time) : Decodes the real time clock from
●
the FM frequency. Some stations may not transmit
PTY, RT or CT information therefore this may not
be displayed in all cases.
TA (Traffic Announcement) : TA ON/OFF it shows
●
that the traffic announcement is in progress.
RDS may not operate correctly if the station
✎
tuned is not transmitting RDS signal properly
or if the signal strength is weak.
To show the RdS signals
You can see the RDS signals the station sends on the
display.
Press the
RdS dISpLAy
FM station.
Each time you press the button, the display
●
change to show you the following information :
PS NAME  RT  CT  Frequency
pS (program
Service)
RT (RadioText)
Frequency
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
The display window cannot differentiate upper
●
case and lower case letters and always uses upper
case letters.
The display window cannot show accented letters,
●
<A,> for instance, may stands for accented <A's>
like <À, Â, Ä , Á, Å and à .>
pTy (program Type) indication and
pTy-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the pTy codes
Before you start!
●
- The PTY Search is only applicable to preset
stations.
- To stop searching any time during the process,
press 5 button while searching.
- There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
17
- English
button while listening to an
While searching, <PS NAME>
appears and then the station
names will be displayed.
<NO PS> appears if no signal is
sent.
While searching, <RT> appears
and then text messages the
station sends will be displayed.
<NO RT> appears if no signal is
sent.
Station frequency (non-RDS
service)