Radio Setup - Samsung HT-J5150 User Manual

Settings
Reset
Reverts all settings to their defaults. Requires that
you enter your security PIN. The default security
PIN is 0000.

Radio Setup

To listen to the radio, you must connect the
●
supplied FM antenna.
Operating the Radio with the Remote
Control
Press the
1. FUNCTION
Tune to the desired station.
2.
preset Tuning 1 : Press the 5 button to
●
select pRESET, and then press the
button to select a preset station.
Up, dOWN
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
Manual Tuning : Press the 5 button to select
●
MANUAL, and then press the
button to tune in to a lower or higher
dOWN
frequency.
Automatic Tuning : Press the 5 button to
●
select MANUAL, and then press and hold the
TUNING Up, dOWN
to automatically search the band.
Selecting Mono or Stereo
Press the button.
MO/ST
Each time you press the button, the sound
●
switches between STEREO and MONO.
In a poor reception area, select MONO for a clear,
●
interference-free broadcast.
presetting Stations
Example : Presetting FM 89.10 into memory.
Press the
1. FUNCTION
Press the
2. TUNING Up,
the FM frequencies, and then select <89.10>.
Press the
3. TUNER MEMORy
button at the bottom of the remote).
C
button to select FM.
TUNING
TUNING Up,
button for a few seconds
button to select FM.
button to scroll
dOWN
button (the yellow
16
Press the
4. TUNER MEMORy
within about 5 seconds. The station is stored in
memory.
If you press the
✎ TUNER MEMORy
repeatedly without changing the station, the
inputted station may be overwritten.
To preset another station, repeat steps 2 to 4.
5.
To tune in to a preset station, press the
●
TUNING Up, dOWN
To delete all Preset FM stations at once, press
✎
the
TITLE MENU
in FM Manual mode until dEFAULT pRESET
appears on the display.
Recording FM Radio
You can record your favourite radio broadcast on a
USB storage device.
Insert a USB device into the USB jack on the
1.
front of the product.
Press the
2. FUNCTION
then press the
TUNING
select the station you want to record.
Press the
3. REd (A)
recording process begins.
The recorded time is displayed on the left and
●
the recording time still available, based on
the amount of free space in the USB storage
device, is displayed on the right.
Press the button to finish your recording.
4. ExIT
The recording is stopped and saved as an .mp3
file at the same time. To play the recorded file,
refer to "Playing Files on a USB Device".
The recorded file is saved in the Tuner folder
✎
which is created automatically.
✎ Only the (OPEN/CLOSE),
MUTE, and
VOLUME
while FM radio is being recorded.
If you don't press any buttons while recording,
✎
the screen saver will be enabled.
Sound effects, such as DSP, EQ, etc., are not
✎
recorded during FM radio recording.
The radio is recorded at a set, default volume
✎
even if you change the volume or press the
button during the recording process.
MUTE
- English
button again
button
button.
button for about 5 seconds
button to select FM, and
button to
Up, dOWN
button to start recording. The
5V 0.5A
MIC 1 MIC 2
(POWER), ExIT,
+/-, buttons are operable
5V 0.5A
MIC 1 MIC 2