Xl Gear Drive Mst-205 Transaxle Removal - Toro XL Series Service Manual

XL GEAR DRIVE
XL Gear Drive MST-205 Transaxle
Removal
1. Disconnect battery cables and remove battery and
battery tray. Remove mower deck (refer to
"Mower" section on page 6 - 1). Lift the rear of the
tractor and remove both the right and left rear tires
(Figure 42).
Figure 42
2. Remove the rear hitch panel, removing the two
bolts and nuts holding the seat springs and two
bolts and nuts located on each side of the hitch
panel (Figure 43).
Figure 43
2 - 12
3. Remove the right and left transaxle belt guides.
Put the park brake on and then slip the traction
drive belt off the transaxle pulley (Figure 44).
(A) Belt Guides
4. Release the park brake and disconnect the brake
spring (A) at the idler arm assembly. Remove the
mvc-0001
brake return spring (B) (Figure 45).
(A) Brake Spring
mvc-0037
A
Figure 44
A
B
Figure 45
(B) Brake Return Spring
XL Lawn Tractor Service Manual
mvc-0002
mvc-0005