Setup; Loose Parts; Installing The Front Casters - Toro 30518 Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.

Loose Parts

Note: Use the chart below to verify all parts have been shipped.
DESCRIPTION
Caster assemblies
Bolt, 3/8 x 3/4 inch
Flange nut, 3/8 inch
Upper handle
Flanged bolt, 3/8 x 1 inch
Flanged nut, 3/8 inch
Wire tie
Clevis pin
Washer
Hairpin cotter
Fuel tank
Bolt, 5/16 x 3/4 inch
Lock washer, 5/16 inch
Locknut
Washer, 5/16 inch
Stud
Spring
Operator's Manual
Engine Operator's Manual
Parts Catalog
Video
Registration card

Installing the Front Casters

1. Align the casters with the holes on the top and front of
the mower, and insert 8 bolts (3/8 x 3/4 inch) through
the mower. Secure the casters with 8 flange nuts
(3/8 inch) below the mower (Fig. 2).
QTY.
2
8 Installing the front casters
8
1
4
Installing the upper handle and wire harness
4
2
2
2 Installing the control rods
2
1
2
2
2
Installing the fuel tank
4
2
2
1
1 Review before operating machine
1
1
1 Fill out and return to Toro
12
USE