Maintenance; Recommended Maintenance Schedule - Toro 30527 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
Each Use
After first 5 hours
After first 8 Hours
8 Hours
25 Hours
40 Hours
50 Hours
100 Hours
After first 200 Hours
200 Hours
At storage or 400 Hours
1
More often in dusty, dirty conditions.
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Engine Oil—check level
• Safety System—check
• Engine—clean outside
• Mower Housing—clean
• Engine Oil—change
• Hydraulic Oil—check
• Cutting Blades—check
• Mower Housing—clean
• Caster Wheels—grease
• Caster Spindles—grease
• Foam Air Cleaner—service
• Mower Deck Idler Pivot—grease
• Pump Drive Idler Pivot—grease
• Pump Control—grease
• Tires—check pressure
• Hydraulic Oil—check
• Belts—check for wear/cracks
1
• Engine Oil—change
• Spark Plug(s)—check
• Engine—clean outside
• Paper Air Cleaner—replace
• Hydraulic lines—check
• PTO Engagement Bellcrank—grease
• Hydraulic oil filter—change
• Oil Filter—change (200 hours or every other oil change)
• Fuel Filter—replace
• Hydraulic oil filter—change
• Chipped Surfaces—paint
• Perform all maintenance procedures listed above before storage
26
1
1