Connecting To A Common Interface Slot (Your Tv Viewing Card Slot) - Samsung UE60J6100 User Manual

Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)
- Turn the TV off to connect or disconnect a CI card or CI card adapter.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be
inserted.
- If you don't insert the "CI or CI+ CARD", some channels
will display the "Scrambled Signal" message.
- The pairing information containing a telephone
number, the "CI or CI+ CARD" ID, the Host ID, and other
information will be displayed in about 2~3 minutes. If an
error message is displayed, please contact your service provider.
- When the configuration of channel information has finished, the message "Updating
Completed" is displayed, indicating the channel list is updated.
NOTE
- You must obtain a "CI or CI+ CARD" from a local cable service provider.
- When removing the "CI or CI+ CARD", carefully pull it out as dropping the "CI or CI+ CARD"
may damage it.
- Insert the "CI or CI+ CARD" in the direction marked on the card.
- The location of the COMMON INTERFACE slot may differ depending on the model.
- A "CI or CI+ CARD" is not supported in some countries and regions, therefore, check with
your authorised dealer.
- If you have any problems, please contact a service provider.
- Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be
distorted or will not be visible.
Inserting Batteries into Remote Control (Battery size: AAA)
Match the polarities of the batteries to the symbols in the battery compartment.
- The colour and shape may vary depending on the model.
- Use the remote control within 7 m of the TV.
- Bright lights may affect the performance of the remote control. Avoid using the remote
control near special fluorescent lights or neon signs.
English - 13