Konica Minolta bizhub C252 Operator's Manual page 188

7
5
To overwrite the data, touch [Yes].
– To return to the Overwrite All Data screen without overwriting the
data, touch [No].
The message "Overwriting all data was completed. Turn OFF main SW
and ON" appears.
6
Follow the instructions in the screen to restart the machine.
The data on the hard disk is overwritten.
Reminder
While the data is being overwritten, do not use the main power switch to
turn the machine off and on.
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not
function normally.
7-24
Control panel settings
bizhub C252