Maintenance; Recommended Maintenance; Schedule(S) - Toro 74408 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the rst 8 operating
hours
After the rst 250
operating hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 500 hours
Yearly
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you
do any maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Check for any loose fasteners and tighten them.
• Change the engine oil.
• Tighten the wheel lug nuts.
• Check the hydraulic uid.
• Change the hydraulic lters and oil.
• Check the safety system.
• Check the engine oil level.
• Clean the air intake screen.
• Check the brake.
• Check the mower blades.
• Clean the mower deck.
• Clean foam air cleaner element.
• Check the paper air cleaner element.
• Check the tire pressure.
• Check pump drive belt.
• Check the hydraulic uid.
• Change the engine oil.
• Check the spark plugs.
• Check and clean engine cooling ns and shrouds.
• Inspect the belts for cracks and wear.
• Lubricate the machine with light oil (Refer to Lubrication).
• Replace the paper air cleaner element.
• Replace the oil lter.
• Replace the fuel lter.
• Adjust the caster pivot bearing.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Lubricate the caster wheel hubs.
• Change the hydraulic lter and oil.
23