Product Overview; Controls - Toro 74408 Operator's Manual

Product Overview

Figure 3
1. Side discharge chute
2. Height-of-cut selection pin 6. Parking brake lever

3. Controls

4. Motion control lever
Controls
Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
Figure 4
1. Ignition switch
2. Hour meter
3. PTO Switch
5. Fuel cap (both sides)
7. Mower deck
8. Front caster wheel
4. Choke lever
5. Throttle control
Using the Hour Meter
The hour meter (Figure 5) records the number
of hours the engine has operated. It operates
when the engine is running. Use these times for
scheduling regular maintenance.
1. Hour meter
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side
and the other on the right side. Each tank connects
to a check valve and then to a tee. From there a
common fuel line leads to the engine (Figure 6).
Close the fuel shutoff valve before transporting
or storing the machine.
1. Fuel shutoff valve
11
Figure 5
Figure 6