Figure 18
2. Install the dipstick securely.
Note: Do not spill oil around the oil fill tube; oil could
leak onto traction parts and cause the traction to slip.
7. Checking the Tire Pressure
The tires are overinflated at the factory for shipping. Reduce
the pressure equally in both tires to between 17 and 20 psi
(116 and 137 kPa).
8. Checking the Skids and
Scraper
Refer to Checking and Adjusting the Skids and Scraper in
Maintenance.
Product Overview
Figure 19
1. Auger/impeller lever
2. Speed selector lever
3. Quick Stick™ discharge chute
control
4. Traction lever
5. Wheel clutch lever (2)
6. Headlight
7. Fuel tank
Figure 20
1. Ignition switch
2. Choke
3. Throttle
10
8. Engine oil ll tube/dipstick
9. Chute deector
10. Discharge chute
11. Fuel shutoff valve
12. Skid (2)
13. Auger
14. Scraper
4. Primer
5. Electric starter
6. Recoil starter