Sony HT-CT390 Operating Instructions Manual page 28

1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
antenna's performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
5)
Advanced Audio Coding
Front L/Front R speaker section
Speaker system
Full range speaker system, Acoustic
suspension
Speaker
60 mm cone type
General
Power requirements
Taiwan models only:
120 V AC, 60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 45 W
Standby: 0.5 W or less (Power saving
mode)
(When "CTRL" in "HDMI>" and "BTSTB"
in "BT >" are set to "OFF")
Standby: 2.8 W or less
(When "CTRL" in "HDMI>" or "BTSTB" in
"BT >" is set to "ON")
Dimensions (w/h/d) (approx.)
900 mm × 52 mm × 121 mm
(without wall mounting brackets)
900 mm × 121 mm × 59 mm
(with wall mounting brackets)
Mass (approx.)
2.2 kg
6)
The system will automatically enter
Power saving mode when there is no
HDMI connection and no BLUETOOTH
pairing history, regardless of the settings
you have made for "CTRL" in "HDMI>"
and "BTSTB" in "BT >".
28
GB
6)
Subwoofer (SA-WCT390)
POWER OUTPUT (reference)
100 W (per channel at 4 ohms, 100 Hz)
Speaker system
Subwoofer system, Bass reflex
Speaker
130 mm cone type
Power requirements
Taiwan models only:
120 V AC, 60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 20 W
Standby: 0.5 W or less
Dimensions (w/h/d) (approx.)
170 mm × 342 mm × 362 mm
(vertical installation)
342 mm × 172 mm × 362 mm
(horizontal installation)
Mass (approx.)
6.5 kg
Wireless transmitter/
receiver section
Frequency band
2.4 GHz (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Design and specifications are subject to
change without notice.