SU12F40 SERIES Vacuum Cleaner user manual ✻ Please read the User Manual thoroughly before operating the vacuum. English ✻ For indoor use only. Thank you for purchasing a Samsung product.
Contents YOUR VACUUM CLEANER 07 Product view 08 Carton contents BEFORE USING THE VACUUM 09 Assemble the handle and pipe 10 Attaching the accessories CLEANER 11 Using the accessories OPERATING THE VACUUM 12 Stowing the power cord 13 Extending the Pipe 13 Using upright mode 14 Operating the Brush bar On / Off Switch 14 Resetting the overload protector...
Page 3
Safety information SAFETY INFORMATION Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in WARNING this manual.
Safety information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, you should always follow these basic precautions: READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACCUM WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: 1. Do not leave the vacuum cleaner unattended when it is plugged in.
Page 5
9. Do not put any object into openings or vents. Do not use with any opening blocked. Keep free of dust, lint, hair, and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers, and all parts of your body away from openings and moving parts.
27. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding. 28. Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc. 29. Always turn off the vacuum before connecting or disconnecting the handy vacuum cleaner.
Your vacuum cleaner PRODUCT VIEW Pipe Handle POWER CORD Power On/Off Brush bar On/Off Button Button Carrying Handle (Dust Bin Handle) Dust Bin Release Button Dust Bin Brush bar Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.
Before using the vacuum cleaner ASSEMBLE THE HANDLE AND PIPE 0 N /O • Connect the Handle and Body. • Unpack the wrapped screw and then fasten the screw using a Phillips head (+) screwdriver as shown. Click 1. Stand the vaccum upright, and then insert the bottom of the pipe into the body hole until you hear a click.
EXTENDING THE PIPE Pipe mode • Push up the handle cap, and then separate the pipe from the body. • Push the button on the pipe to make the pipe longer. USING UPRIGHT MODE Upright mode • Place a foot on the brush, and then tilt the handle back gently to release the lock. • Push the power On/Off switch.
OPERATING THE BRUSH BAR ON / OFF SWITCH ON/OFF • Push the power On/Off switch, and then push the brush bar On/Off switch. • The Brush Switch should be in the "On" position for normal carpet cleaning. • Turn the Brush Switch "Off" for bare floor cleaning or other delicate surfaces. In the upright position, the Brush bar does not work.
Maintenance EMPTYING THE DUST BIN • Empty the dust bin when dust reaches the 'MAX' mark. • Take the dust bin out by pushing the button on the handle. • To empty the dust bin, hold the dust bin over a garbage can, and then push the button near the bottom of the bin.
CLEANING THE GRILLE • Separate the dust bin from the vacuum's body. • Clean the grille with the dusting brush to remove lint. • To re-attach the dust bin to the vacuum's body, follow steps 3 and 4. English - 18...
CLEANING THE PREMOTOR FILTER • Pull the dust bin cover to open. • Remove the filter from the dust bin. • Shake the filter to remove dust, and then wash the filter. • Leave the filter in the shade until completely dry.
Page 20
• Put the filter into the dust bin. Check the filter regularly and wash every 1~2 months. Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow it to dry for 12 hours. Do not use a wet filter Replace the dust filter if it becomes damaged or deformed.
CLEANING THE FILTER • Take the dust bin out by pushing the button on the handle. • Remove the filter cover. • Separate the filter from the vacuum's body. • Shake the filter to remove dust. Clean the filter when suction is noticeably and continuously reduced or the vacuum cleaner overheats abnormally.
Page 22
• Re-insert the filter into the vacuum's body. • Re-assemble the filter and filter cover. Click • Re-attach the dust bin to the vacuum. The dust bin will not re-attach to the vacuum if the filter cover is not installed correctly.
CHECKING BRUSH • Turn off and unplug the vaccum. Lie the vaccum down so its bottom is accessible as shown. • Carefully cut off any hair or string caught in the brush. Before inspecting the brush bar, turn off the brush bar and unplug the vacuum. CAUTION English - 23...
CHECKING FOR CLOGS • Place a foot on the brush, and then tilt the handle back gently to release the lock. • Push the release button on the brush housing, and then pull the hose out. • Check for clogs in the opening of the brush housing and in the hose.
MINI TURBO BRUSH (OPTIONAL) INSPECTING THE BRUSH ROLL • If a clog is present or debris is visible, inspect the brush roll. INSPECTING THE BELT • If the belt is broken or cracked, replace it with a new belt following the instructions on the right.
CLEANING THE DIVERTER COVER • Open the Diverter cover using a flat head (-) screwdriver. • Clean the inside of the cover with a dry cloth. • Re-attach the cover after cleaning. English - 26...
Troubleshooting Check this list of problems and possible solutions before bringing your vacuum to a service center. PROBLEM SOLUTION • Check the electrical plug. Make sure it is fully plugged in. Vacuum won’t run. • Press the Power on/off button. • Reset overload protector.
Page 28
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. COUNTRY CUSTOMER CARE CENTER WEB SITE 0330 SAMSUNG (7267864) www.samsung.com SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com DJ68-00709E-00...