5.
Select Document (ADF/Platen) or Document (ADF Auto Duplex) for Select
Source.
Note
Select the Scan both sides when scanning from the ADF checkbox in Scan Options when
scanning via Document (ADF/Platen).
6.
Set the color mode, document size, and scanning resolution as required.
Click Document Scan Orientation Settings... to specify the orientation of the documents to be
scanned. In the displayed dialog box, you can specify the Orientation and Binding Side. How to
place the documents when scanning the back sides depends on the Binding Side.
Click Document Output Setting... to specify how to output scanned documents. In the displayed
dialog box, you can specify the output setting.
When setting is completed, click OK.