Canon MX720 series Online Manual page 54

Important
Binding Side cannot be specified when scanning only the front side of each document.
• Document Output Setting...
This appears when you select Auto for Select Source and select the Scan both sides when
scanning from the ADF checkbox, or when you select Document (ADF Auto Duplex).
Click to display the Document Output Setting dialog box in which you can specify how to output the
paper when scanning from the ADF.
You can select Output with front and back reversed (Fast) or Output in the page order.
• Scan both sides when scanning from the ADF
This appears when you select Auto for Select Source. Scans both sides of the documents placed on
the ADF.
• Compress scanned images upon transfer
Compresses scanned images when transferring them to a computer. This is useful when your scanner
or printer and computer are connected with a slow interface such as USB1.1 or a network.
Important
This does not appear when Select Source is Auto.
• Image Processing Settings
Click (Plus) to set the following. Available setting items vary by Select Source.
When Select Source is Auto
• Apply recommended image correction
Applies suitable corrections automatically based on the item type.
Important
The color tone may differ from the source image due to corrections. In that case, deselect
the checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
When Select Source is Photo
Important