Canon MX470 series Online Manual page 432

◦ Manual/auto switch
If you select ON, the machine automatically receives faxes after the external device rang a
specified length of time.
You can specify the length of time until automatic reception is started.
◦ User-friendly RX
If you select ON, the machine automatically switches from telephone calling to fax reception by
detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering
machine answers. When you have an answering machine connected to the machine, select ON to
switch to fax reception automatically after the answering machine answers.
If you select OFF, the machine does not switch from telephone calling to fax reception
automatically even if the machine detects the fax signal (CNG signal). Select OFF if you want the
machine not to switch automatically during a call.
Note
• If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device
rings specified with Incoming ring in Fax only mode is available in TEL priority mode.
If you want to specify the number of times the external device rings in TEL priority mode, select
Fax only mode for Receive mode set. under FAX menu, specify the number of times the
external device rings with Incoming ring, then switch to TEL priority mode for Receive mode
set..
• If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto
switch be set to OFF.
• Advanced setting in Fax only mode
You can specify the following setting item.
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
• Advanced setting in DRPD
You can specify the following setting items.
◦ DRPD: FAX ring pat.
Sets the distinctive ring pattern of a call that the machine assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
Setting the DRPD Ring Pattern (US and Canada only)
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
• Advanced setting in Network switch
You can specify the following setting item.
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
432