Sending Faxes With The Numeric Buttons - Canon MX470 series Online Manual

Sending Faxes with the Numeric Buttons

This section describes dialing and sending faxes directly using the Numeric buttons.
Important
• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect
registration of fax/telephone numbers. When you send important documents, it is recommended that
you send them after speaking on the telephone.
Sending a Fax after Speaking on Telephone
1. Make sure that the machine is turned on.
2. Press the FAX button.
The Fax standby screen is displayed.
3. Load documents on the platen glass or in the ADF.
Important
• When sending a double-sided document, load the document on the platen glass. Double-sided
documents cannot be automatically scanned and sent from the ADF.
Note
• For details on the types, conditions of document, and how to load the document:
Loading Originals
4. Adjust the scan contrast and resolution as necessary.
Adjust the scan contrast and resolution following the procedure below.
1. Press the Menu button.
The FAX menu screen is displayed.
2. Use the
3. Use the
The Scan contrast screen is displayed.
4. Use the
The button decreases the scan contrast, and the
By pressing the OK button, the LCD returns to the FAX TX settings screen.
5. Use the
The Scan resolution screen is displayed.
button to select FAX TX settings, then press the OK button.
button to select Scan contrast, then press the OK button.
button to select the scan contrast, then press the OK button.
button to select Scan resolution, then press the OK button.
button increases the scan contrast.
439