Samsung SCC-643 Owner's Instructions Manual page 13

Installing SCC-643(P)
Installation Precautions
1) Make sure that the installation site can sufficiently support a minimum of
four times the net weight of the SCC-643(P) Combi Dome Camera and
other accessories.
2) Install in an area where the space above the ceiling board is over 18 cm
(7 in.) high.
3) Use the supplied screws to fasten the camera to the bracket assembly.
4) Keep persons away from the installation area, as there is a risk of falling
objects.
Also, move valuables to a safe location before installation.
Separately Sold Products for Installation
Depending on the installation site, it may be convenient to use one of the
following products.
1) CEILING MOUNT BRACKET (SBR-100DCM)
This bracket is used for installing
the SMARTDOME CAMERA in the
plenum above the drop ceiling.
2) WALL MOUNT ADAPTOR (SADT-100WM)
This adaptor is used for installing the indoor
housing or the outdoor housing for the
Combi Dome Camera on a wall.
2-5
3) INDOOR HOUSING (SHG-120)
This housing is used for installing the Combi Dome Camera to an indoor
wall or a ceiling.
4) OUTDOOR HOUSING (SHG-220)
This housing is used for installing the Combi Dome Camera to an
outdoor wall or a ceiling.
E
2-6