Trying The Camera Out; Shooting Still Images; Shooting Movies - Canon PowerShot N100 Getting Started

Trying the Camera Out

Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Turn the camera on and enter
1
[ ] mode.
 
Press the ON/OFF button.
 
Set the mode switch to [4].
Compose the shot.
2
 
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
Shoot.
3

Shooting Still Images

 
Press the shutter button lightly ( ).
 
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
 
If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.

Shooting Movies

 
Press the movie button to start shooting,
and press it again to stop.
7