Table of Contents
Advertisement
Trying the Camera Out
Try out the camera by turning it on, shooting some still images or movies,
and viewing them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
●
Press the power button.
●
The startup screen is displayed.
2
Enter [
●
Press the [
until [
●
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
●
Frames displayed around any detected
subjects indicate that they are in focus.
Still Images
Movies
] mode.
] button several times
] is displayed.
3
Compose the shot.
●
To zoom in and enlarge the subject, move
the zoom lever toward [
] (telephoto),
and to zoom away from the subject, move
it toward [
] (wide angle).
4
Shoot.
Shooting Still Images
1) Focus.
●
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
●
If [Raise the flash] is displayed, lift the
flash with your fingers. It will fire when
shooting. If you prefer not to use the
flash, push it down with your finger, into
the camera.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
20
Advertisement
Table of Contents
