Inserting The Battery Pack And Memory Card - Canon PowerShot N100 Getting Started

Initial Preparations

Inserting the Battery Pack and Memory Card

Terminals
Terminals
4
 
When charging is finished, the lamp turns
green. Remove the battery pack.
 
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to "Specifications" in the
downloadable Camera User Guide.
Open the cover.
1
 
Slide the cover ( ) and open it ( ).
Insert the battery pack.
2
 
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
 
To remove the battery pack, press the
battery lock in the direction of the arrow.
Battery
Lock
Check the card's write-protect
3
tab and insert the memory card.
 
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
 
Insert the memory card facing as shown
until it clicks into the locked position.
 
To remove the memory card, push it in
until you feel a click, and then slowly
release it.