Troubleshooting Guide
I cannot shoot a movie.
Under the [53] tab, if you set [Wi-Fi] to [Enable], you cannot shoot
movies. Before shooting movies, set [Wi-Fi] to [Disable].
Movie shooting stops by itself.
If the card's writing speed is slow, movie shooting may stop
automatically. If the compression method is set to [IPB], use a card
with a reading/writing speed of at least 6 MB per sec. If the
compression method is set to [ALL-I (I-only)], use a card with a
reading/writing speed of at least 20 MB per sec (p.3). To find out
the card's reading/writing speed, refer to the card manufacturer's
website.
If the movie shooting time reaches 29 min. 59 sec., the movie
shooting will stop automatically.
The ISO speed cannot be set for movie shooting.
In shooting modes other than <a>, the ISO speed is set
automatically. In the <a> mode, you can freely set the ISO speed
(p.209).
ISO 16000/20000/25600 cannot be set for movie shooting.
Under [z3: ISO speed settings], if you set the [ISO speed
range]'s [Maximum] setting to [25600/H], the maximum ISO
speed for manual ISO speed setting will be expanded and then
ISO 16000/20000/25600 can be set. However, since shooting a
movie at ISO 16000/20000/25600 may result in much noise, it is
designated as an expanded ISO speed (displayed as [H]).
362