Canon EOS 6D Instruction Manual page 212

k Shooting Movies
Notes on Movie Shooting
You can use Remote Controller RC-6 (sold separately, p.167) to start

and stop the movie shooting if the drive mode is <Q> or <k>. Set
the shooting timing switch to <2> (2-sec. delay), then press the transmit
button. If the switch is set to <o> (immediate shooting), still photo
shooting will take effect.
With a fully-charged Battery Pack LP-E6, the total movie shooting time

will be as follows: approx. 1 hr. 35 min. at room temperature (23°C/73°F),
and approx. 1 hr. 25 min. at low temperature (0°C/32°F).
When using a (super) telephoto lens equipped with the power focus

mode marketed since the second half of 2011, power focusing is
possible during movie shooting.
Final Image Simulation
The final image simulation is a function that allows you to see the
effects of the Picture Style, white balance, etc., on the image.
During movie shooting, the image displayed will automatically reflect
the effects of the settings listed below.
Final Image Simulation for Movie Shooting
Picture Style

* All settings such as sharpness, contrast, color saturation, and color tone will
be reflected.
White balance

White balance correction

Exposure

Depth of field

Auto Lighting Optimizer

Peripheral illumination correction

Chromatic aberration correction

Highlight tone priority

212