Canon EOS 6D Instruction Manual page 290

w Printing
Printing Effect
EOn
EOff
EVivid
ENR
0 B/W
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural
zNatural M
EDefault
* When you change the printing effects, changes are reflected in the image
displayed on the upper left. Note that the printed image may look slightly
different from the displayed image, which is only an approximation. This
also applies to [Brightness] and [Adjust levels] on page 292.
If the shooting information of an image shot at the H1 or H2 ISO speed is
imprinted, the correct ISO speed may not be imprinted.
290
Set the printing effects.
4





The image will be printed using the printer's standard colors.
The image's Exif data is used to make automatic corrections.
No automatic correction will be applied.
The image will be printed with higher saturation to produce
more vivid blues and greens.
Image noise is reduced before printing.
Prints in black-and-white with true blacks.
Prints the image in the actual colors and contrast. No automatic
color adjustments are applied.
The printing characteristics are the same as the "Natural"
setting. However, this setting enables finer printing adjustments
than with "Natural."
The printing will differ depending on the printer. For details,
refer to the printer's instruction manual.
Set it if necessary. If you do not need
to set any printing effects, go to step 5.
What is displayed on the screen
differs depending on the printer.
Select the option, then press <0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed brightly
next to <z>, you can also adjust
the printing effect (p.292).
Description