INSTALLING THE CARD
Before using a newly purchased card or one that was used in another device,
be sure to format it with this camera (page 101 and 112). If an unformatted
card is used, the card itself may become unusable.
1 Open
Card's label side
<When removing the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
1 Push the middle part of the card.
2 Insert the card
i Push straight in
until you hear a
click.
2 Pull the card
out straight.
3 Close
4 Close firmly
until you hear
a click.
23
VQT3P24