Panasonic HX-DC10 Operating Instructions Manual page 156

The "Cannot edit,
differing settings
exist." message
appears.
Why is a noise
heard from a
nearby TV or
radio during
battery
recharging?
Why does the
"CARD FULL." or
"Built-in Memory
full." message
Misc.
appear?
Why does the
"Card is
protected"
message appear?
Why can not the
camera be
operated?
A problem such
as inability to
record or play
back occurs.
156
VQT3P24
Question
You have
attempted to
splice videos that
were recorded in
different recording
modes.
Electromagnetic
waves are emitted
from the AC
adaptor.
There is no more
available memory
on the card or in
the camera's built-
in memory.
The lock switch on
the card is in the
locked (protect)
position.
A temporary
internal circuitry
problem may be
the cause.
The card contains
files that were
saved using a
device other than
this camera.
Answer
Select videos that
were recorded in the
same recording
mode.
Move the AC
adaptor further away
from the TV or radio
when recharging the
battery pack.
Delete unnecessary
files, or use a card
that has more
memory available.
Move the lock switch
to the unlocked
position.
Remove the AC
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.
After saving your
files to a different
medium, format the
card.
Action