File No. Continued Setting - Panasonic HX-DC10 Operating Instructions Manual

File No. continued setting (page 103)
<File number continued function [OFF]>
If a newly formatted card is used, the file name (image number) of the
captured image automatically begins from 0001. If the card is subsequently
reformatted, or if a different reformatted card is used, the file names again
begin from 0001.
File name (image number)
Card A 0001, 0002 ...... 0012, 0013
Card B 0001, 0002 ...... 0012, 0013
<File number continued function [ON]>
By setting the file number continued function to [ON], even if the card is
reformatted or the card is replaced with another card, the consecutive
numbering of file names continues from the last number recorded by the
camera.
File name (image number)
Card A 0001, 0002 ...... 0012, 0013
Card B 0014, 0015 ....... 0025, 0026
110
VQT3P24
Replace card
Replace card