Pattern Setup; Scan Setup - Samsung SCC-C6323P User Manual

How to use OSD Menu

PATTERN SETUP

PATTERN SETUP
PATTERN NO.
CLR PATTERN
<EDIT PATTERN>
BACK
EXIT
• PATTERN Number [1~4 ]
Selects Pattern number to edit.
If a selected pattern number is not defi ned,
"UNDEFINED" will be displayed under selected
pattern number.
• CLEAR PATTERN [CANCEL/OK]
Deletes data in current pattern
• EDIT PATTERN Starts editing pattern.
❖
Edit Pattern
① By using Joystick, move to start position with
appropriate zoom. To start pattern recording,
press NEAR or ENTER key. To exit this menu,
press FAR key.
EDIT PATTERN 1
MOVE TO START POSITION
[NEAR:START/ FAR:CANCEL]
② Move camera with joystick of controller or run
preset function to memorize the path (mostly
curve path) in a selected pattern. The total
memory size and the rest memory size is
displayed in the form of bar. Maximum 1200
communication commands can be stored in a
pattern.
30 – 10X MINI SMART DOME CAMERA
1
UNDEFINED
CANCEL
0/0/x1/N
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
③ To save data and exit, press NEAR or ENTER key.
To cancel recording and delete record data,
press FAR key.

SCAN SETUP

SCAN SETUP
SCAN NO.
CLEAR SCAN
<EDIT SCAN>
BACK
EXIT
• SCAN Number
Selects Scan number to edit.
If a selected Scan number is not defi ned,
"UNDEFINED" will be displayed under selected Scan
number.
• CLEAR SCAN
Deletes data in current Scan
• EDIT SCAN
❖
Edit Scan
① Press NEAR or ENTER key in "NO" list to start
Scan setup.
EDIT SCAN
NO. ACTION NO. DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
SAVE
CANCEL
0/0/X1/N
1
UNDEFINED
CANCEL
[1~8]
[CANCEL/OK]
Starts editing Scan.
1
[NEAR:EDIT]