Editing A Display - Omega Engineering OMB-NETSCAN 1500 User Manual

Editing a Display

Display Configuration Setup Dialog Box with an Existing Configuration
To explain editing a configuration, we make use of an example in which assumes you want to edit Chart 1.
In the following figure, Chart 1 was highlighted by clicking on it with the mouse cursor. The Display
Configuration Setup box then changed, allowing you to see specific channel types (such as volts only) or to
"Show all Types," as in the example. From this setup box you can add or delete charts and channels. You
can:
•
Use the Shift or Ctrl key in conjunction with the cursor to select several channels for addition or deletion
•
double-click on an available channel to add it to the selected channels
•
double-click on a selected channel to remove it from the selected channels list
Note: When a chart contains overlapping channels which share values (such that their traces reside on top
of each other), the more recent channel will obscure the earlier channel. Note that the lower a
channel is on the display list, the more recent it is in regard to the display.
5-10 PostView
Adding Channel 2 to Chart 1
NetScan User's Manual