Samsung MWR-ZS00 User Manual page 7

Name of the parts
Slave (Individual zone) controller (MWR-ZS10)
①
③
④
⑧
⑨
Part
①
Indicator
②
③
Main Control
④
ZC_MWR-ZS00_IB_G116338-1_EN.indd 6
Indication
Operation mode indicator
• Slave controller does not display the operation mode of the indoor
unit. Only Auto, Cool and Heat will be displayed accordingly.
• 'Auto' will be displayed when the desired temperature is set to a zone
to controller the damper automatically. 'Auto' and 'Heat' or 'Cool' can
be displayed at the same time.
• Cool' will be displayed when the indoor unit is operating in Cool, Dry
or Fan mode.
• 'Heat' will be displayed when the indoor unit is operating in Heat
mode.
NOTE
Screen lock indicator
• Appears when the screen is locked.
• Command cannot be executed and
when;
- If you have selected the temperature that is beyond the range of
upper or lower temperature limit.
Power button
• Tap to turn on/off the damper
Temperature adjustment button
• Tap + and – to increase or decrease the desired temperature
• When the room temperature has not reached the desired
temperature, damper will remain open
ENGLISH-6
⑤
②
⑥
⑦
⑩
Name and explanation
• When the desired temperature is set to a zone,
'Auto' will appear however, it will disappear when
you open/close the damper manually by using the
Power button or by the master controller.
icon will blink for 3 seconds
2014-04-21 오후 5:25:32