Table of Contents
Advertisement
Setting the timer
Cancelling the non-repetitive timer
Tap and hold the Once button for 3 seconds to delete existing timers.
f 'Delete (3sec)' is displayed under the 'Once/Repeat' button when the timer setting exists.
f
f
f
icon will blink for 3 seconds and it will disappear afterwards.
f Timer is successfully deleted when
f
ZC_MWR-ZS00_IB_G116338-1_EN.indd 16
5. Set the 'End' time for the timer.
f Tap <, > to select the value and tap the OK button to set next item.
f
f Set AM/PM, hour, minute in order.
f
f After setting the minute, tap the OK button to move on to the next step.
f
• If you want to turn off the air conditioner manually, tap and hold the
> button for 3 seconds and press the OK button when the hour and
NOTE
minute display as --:--.
6. Select the zone you wish to apply the timer.
f You can select as many zones as you want by tapping each Zone button.
f
f When timer is applied properly,
f
button.
f After selecting the zone, tap the OK button to complete the timer setting.
f
• Previously applied timer setting (that hasn't been executed) will be
canceled upon adding a new (non-repetitive) timer.
NOTE
• You must select at least 1 zone when you set the timer.
(If you tap the OK button without selecting a zone, all the zone indicator
will blink twice and wait for the user to select a zone.)
• Select the common zone (Default: Zone 1) if you just want to turn on the
indoor unit.
icon disappears.
ENGLISH-16
icon will appear on the left side of the zone
2014-04-21 오후 5:25:38
Hide quick links:
Advertisement
Table of Contents
