Samsung MWR-ZS00 User Manual page 19

Setting the timer
ZC_MWR-ZS00_IB_G116338-1_EN.indd 18
5. Set the 'End' time for the timer.
f Tap <, > to select the value and tap the OK button to set next item. f
f Set AM/PM, hour, minute in order. f
f After setting the minute, tap the OK button to move on to the next step. f
• If you want to turn off the air conditioner manually, tap and hold the
> button for 3 seconds and press the OK button when the hour and
NOTE
minute display as --:--.
6. Tap <, > button to select the day to apply the timer.
f Display may differ depending on the previously set weekly timer. f
: No weekly timer has been set.
: One weekly timer has been set.
: Two weekly time has been set and cannot add another timer.
f Tap Select Day(s) button after selecting the day, will become when timer is f
successfully added.
f Tap < , > button again to select another day and tap Select Day(s) button again f
to add the timer.
f When finished applying the timer to desired day(s), tap the OK button to f
complete the setting and move on to the next step.
• You may select as many days as you want but cannot select same day
twice.
NOTE
• If you tap the OK button without selecting a day, all the active schedule
indicator will blink twice (1 time per second) and wait for the user to
select a day.
7. Select the zone you wish to apply the timer.
f You can select as many zones as you want by tapping each Zone button. f
f When timer is applied properly, f
button.
f After selecting the zone, tap the OK button to complete the timer setting. f
• You must select at least 1 zone when you set the timer.
(If you tap the OK button without selecting a zone, all the zone indicator
NOTE
will blink twice and wait for the user to select a zone.)
• Select the common zone (Default: Zone 1) if you just want to turn on the
indoor unit.
ENGLISH-18
icon will appear on the right side of the zone
2014-04-21 오후 5:25:39