Table of Contents
Advertisement
Setting the temperature to open/close the damper automatically
ZC_MWR-ZS00_IB_G116338-1_EN.indd 11
1. Tap and hold the desired Zone (1~8) button for 3 seconds.
f When the desired zone is selected, border line for other zones will disappear and
f
only selected zone will have border line.
f If the selected zone already has previous temperature setting, it will be displayed
f
in temperature indicator.
f If the selected zone doesn't have previous temperature setting, it will display the
f
same temperature set from the master controller.
2. Tap the Temp +, - button to set the desired temperature for the selected zone.
f When the room temperature of the zone reaches the desired temperature,
f
damper will be closed automatically and otherwise, damper will be open.
3. Tap the OK button to end the setting.
f When the temperature setting for the selected zone is complete, temperature
f
indicator will display the temperature set from the master controller.
ENGLISH-11
2014-04-21 오후 5:25:36
Hide quick links:
Advertisement
Table of Contents
