Dismantling Of The Cassette Cover; Dismantling Of The Cdc Module And Front Panel Assembly; Separating The Mpeg And The Cdc Module - Philips FW-V787/21M Service Manual

DISMANTLING INSTRUCTIONS

Dismantling of the Cassette Cover

2. Twist screw driver
3. Lift up and out
1. Place screw driver
(flat side) between
the cassette cover
& cassette door
Remove Cassette Cover

Dismantling of the CDC Module and Front Panel Assembly

1) Loosen 4 screws to remove the Cover Top (pos 255) of the
set.
2) Loosen 3 screws to remove the Panel Left (pos 253) and
3 screws to remove the Panel Right (pos 254) of the set.
3) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
2-1
Cassette Cover
Sliding out the CDC Tray
Dismantling of the CDC Module and Front Panel Assembly
4) Remove the Cover Tray VCD (pos 106) as indicated.
5) Loosen 2 screws A and 2 screws B to remove the CDC
Module (pos 1105) as indicated.
6) Remove 2 screws (pos 226) at the bottom to separate the
Front Panel Assembly from the Plate Bottom (pos 265).

Separating the MPEG and the CDC Module

1) Remove 4 screws P to remove the MPEG shield & MPEG
Board.
2) Remove 2 screws M and uncatch C3 with a flat screw-
driver in the direction as shown to loosen the Plate
Insulator.
2-1
Remove Cover Tray VCD
Front View CDC
Remove CDC Module
P
C3
M