Canon MG5500 series Online Manual page 30

1. Open the Utilities folder in the Applications folder.
2. Start Network Utility.
3. Click the Ping button.
4. Make sure that Send only XX pings (XX are numbers) is selected.
5. Enter the IP address of the target printer or the target access point in Enter the network
address to ping..
When using the OS other than Mac OS X v.10.6.8, enter the IP address of the target printer or the
target access point in Please enter the network address to ping.
6. Click Ping.
"XXX.XXX.XXX.XXX" is the IP address of the target device.
A message such as the following is displayed.
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms
--- XXX.XXX.XXX.XXX ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
If the packet loss is 100%, the communication is not available. Otherwise, the computer is
communicating with the target device.
Checking the Network Setting Information
To check the IP address or the MAC address of the machine, display the network setting information
using the operation panel of the machine or print out the network setting information of the machine.
LAN settings
Printing Out Network Setting Information
30