Cleaning The Paper Feed Rollers From Your Computer - Canon MG7100 series Online Manual

Cleaning the Paper Feed Rollers from Your Computer

Cleans the paper feed rollers. Perform feed roller cleaning when there are paper particles
sticking to the paper feed rollers and paper is not fed properly.
The procedure for performing the feed roller cleaning is as follows:
Roller Cleaning
1. Prepare the machine
Remove all sheets of paper from the paper source from which paper could not be
properly fed.
2. Select Cleaning from the pop-up menu on the Canon IJ Printer Utility
3. Click the Roller Cleaning icon
A message appears.
4. Select Cassette (upper) or Cassette (lower), and then click OK
The confirmation message appears.
5. Execute paper feed roller cleaning
Make sure that the machine is on and then click OK.
Paper feed roller cleaning starts.
6. Complete paper feed roller cleaning
• Cleaning the feeding rollers of the cassette (upper)
Cut a sheet of A4 size or Letter size plain paper into four pieces by cutting it in half
vertically and then in half horizontally.
After the rollers have stopped, follow the message instructions and load all four
cut pieces into the cassette (upper) so that the shorter cut edges are toward the
front. Then click OK.
• Cleaning the feeding rollers of the cassette (lower)
After the rollers have stopped, follow the instruction in the message, load three
sheets of A4 size or Letter size plain paper into the cassette (lower), and click OK.
Paper will be ejected and feed roller cleaning will be completed.
210