Removing The Memory Card - Canon MG7100 series Online Manual

Removing the Memory Card

Important
If you used the card slot as the memory card drive of a computer, you must perform the
"safe removal" operation on your computer before physically removing the memory card
from the machine.
Setting Up the Card Slot as the Memory Card Drive of the Computer
1. Holding both sides of the paper output tray, gently open it.
2. Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from
the machine.
Important
Do not remove the memory card while the Access lamp is flashing. The Access
lamp flashes while the machine is reading or writing data from/to the memory card.
If you remove the memory card or turn off the power while the Access lamp is
flashing, the data saved on the memory card can be damaged.
3. Close the paper output tray.
171