Changing The Input Source - Samsung PS50C7780 User Manual

CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the "CI or CI+ CARD" must be inserted.
y If you don't insert the "CI or CI+ CARD," some channels will
display the message "Scrambled Signal".
y The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
y When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the
channel list is updated.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be
seen.
x
When you are watching the satellite TV, remove the "CI or CI+ CARD" of terrestrial and cable. The screen will be
distorted or will not be seen.

Changing the Input Source

Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players
/ cable box / STB satellite receiver
connected to the TV.
■ TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB
✎
In the Source List, connected
inputs will be highlighted.
✎
Ext. and PC always stay activated.
[7790_GER]BN68-02696K-00L04.indb 11
COMMON INTERFACE slot may be different depending on the model.
SOURCE
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the
you should set to DVI PC mode under Edit Name.
✎
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
HDMI IN 1(DVI) port,
11
English
2010-03-26 오후 4:14:46