Download  Print this page

Samsung PS50C7000 User Manual

Series 7+.
Hide thumbs


If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Customer Care Centre
1300 362 603
0800 SAMSUNG (0800 726 786)
010-6475 1880
(852) 3698-4698
3030 8282
1800 110011
1800 3000 8282
1800 266 8282
1 800 588 889
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
Web Site
Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model _____________ Serial No. _____________


   Also See for Samsung PS50C7000

   Summary of Contents for Samsung PS50C7000

  • Page 1 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Web Site Customer Care Centre AUSTRALIA 1300 362 603 NEW ZEALAND 0800 SAMSUNG (0800 726 786)
  • Page 2: Securing The Installation Space

    Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only. If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
  • Page 3: Table Of Contents

    Contents Getting Started Accessories Viewing the Control Panel Viewing the Remote Control Connecting to an Antenna Plug & Play (Initial Setup) Connections Connecting to an AV Device Connecting to an Audio Device 10 Changing the Input Source Basic Features 10 How to Navigate Menus 11 Using the INFO button (Now &...
  • Page 4: Getting Started

    Getting Started Accessories ✎ Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer. ✎ The items’ colours and shapes may vary depending on the models. y Remote Control & Batteries (AAA x 2) y Cleaning Cloth y Warranty Card / Safety Guide (Not available in some locations) y Owner’s Instructions...
  • Page 5: Viewing The Control Panel

    Viewing the Control Panel ✎ The product colour and shape may vary depending on the model. Remote control sensor Power Indicator Speakers Remote control sensor Aim the remote control towards this spot on the TV. Power Indicator Blinks and turns off when the power is on and lights up in standby mode. SOURCEE Toggles between all the available input sources.
  • Page 6: Viewing The Remote Control

    P.SIZE: Selects the picture size (p. 16). Use these buttons in Media Play SUBT.: Displays digital subtitles (p. 23). and Anynet+ modes (p. 34, 42). (�: Controls recording for Samsung recorders that have the Anynet+ feature) Installing batteries (Battery size: AAA) ✎...
  • Page 7: Connecting To An Antenna

    Connecting to an Antenna When the TV is initially powered on, basic settings proceed automatically. ✎ Preset: Connecting the power cord and antenna. VHF/UHF Antenna Cable ANT OUT Plug & Play (Initial Setup) When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button.
  • Page 8: Connections

    1.4, contact the provider of the device to confirm the HDMI version and request an upgrade. Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return Channel) function is only supported on HDMI IN 2(ARC).
  • Page 9: Connecting To An Audio Device

    Using a Component (up to 1080p) or Audio/Video (480i only) Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR DVD / Blu-Ray player AUDIO OUT AUDIO OUT VIDEO OUT COMPONENT OUT R-AUDIO-L R-AUDIO-L VCR / DVD White Yellow White Blue...
  • Page 10: Changing The Input Source

    Connections Changing the Input Source Edit Name ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / Source List AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Use to select TV or other external input SOURCE Name the device connected to the input jacks to make...
  • Page 11: Using The Info Button (now & Next Guide)

    Using the INFO button (Now & Next guide) Using Scheduled View The display identifies the current channel INFO Guide 2:10 Tue 1 Jun and the status of certain audio-video settings. DTV Air 800 five Family Affairs The Now & Next guide shows daily TV 18:00 - 18:30 programme information for each channel Drama...
  • Page 12: Channel List

    Basic Features Channel Manager Using Favourite Channels ¦ Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the My Channels Channels, My Channels or Scheduled screen. (in Channel Manager) ORF1 Shows all favourite channels. ORF2 0 : You can set the selected ■...
  • Page 13: Channel Menu

    Editing Channels ¦ Channel Menu Channel Manager Option Menu Retuning Channels ¦ (in Channel Manager) 1. Select a channel and press the TOOLS button. Country 2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu. You can change the country.
  • Page 14: Picture Menu

    Basic Features ■ Sort (analogue channels only): This operation allows Picture Menu you to change the programme numbers of the stored channels. This operation may be necessary after using Changing the Preset Picture Mode ¦ the auto store. ■ Delete: You can delete a channel to display the channels you want.
  • Page 15: Changing The Picture Options

    ■ No-Signal Power Off (Off / 15 min / 30 min / 60 min): ■ White Balance: Adjust the colour temperature for a To avoid unnecessary energy consumption, set how long more natural picture. you want the TV to remain on if it’s not receiving a signal. R-Offset / G-Offset / B-Offset: Adjust each colour’s ✎...
  • Page 16 Basic Features ■ Colour Tone (Cool / Normal / Warm1 / Warm2) ■ Digital Noise Filter (Off / Low / Medium / High / Auto ✎ / Auto Visualisation): When the broadcast signal is Warm1 or Warm2 will be deactivated when the weak, some static and ghosting may appear.
  • Page 17 Avoid watching 3D this feature, you must purchase a pair pictures for long hours. of Samsung 3D Active Glasses (SSG- – Even those without a personal or family history 2100AB, SSG-2200AR, SSG-2200KR) to of epilepsy or stroke may have an undiagnosed view 3D video.
  • Page 18 Basic Features ■ 3D Mode: Select the 3D input format. ■ 3D Auto View (Off / On): If 3D Auto View is set to On, ✎ a “Side by Side” format HDMI signal with one of the If you want to feel the 3D effect fully, please wear resolutions below is automatically switched to 3D.
  • Page 19 3D Active Glasses. (If not, contact your computer manufacturer or Samsung Dealer.) When watching pictures from a 50Hz 3D source with 1.
  • Page 20: Sound Menu

    Basic Features Sound Menu Audio Format (digital channels only) Changing the Preset Sound Mode ¦ When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio SRS TheaterSound receiver.
  • Page 21: Setup Menu

    Additional Setting ¦ Selecting the Sound Mode ■ DTV Audio Level (MPEG / HE-AAC) (digital channels When you set to Dual f-g, the current sound mode is only): This function allows you to reduce the disparity of displayed on the screen. a voice signal (which is one of the signals received during Audio a digital TV broadcast) to a desired level.
  • Page 22: Using The Sleep Timer

    Basic Features Using the Sleep Timer Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, ¦ Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to ■ Sleep Timer : Automatically shuts off the TV activate the timer.
  • Page 23 Subtitle ■ BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products Use this menu to set the Subtitle mode. which support BD Wise. When BD Wise is turned On, SUBT. the picture mode is automatically changed to the optimal ■...
  • Page 24: Support Menu

    Software Upgrade can be performed via a broadcasting ■ Size (Õ / à / À / Œ): Select a size for the sub- signal or by network connection or downloading the latest firmware from “,” to a USB memory picture. device.
  • Page 25: Hd Connection Guide

    HD Connection Guide Refer to this information when connecting external devices to the TV. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
  • Page 26: Advanced Features

    Advanced Features Connecting to a PC Using an HDMI/DVI Cable / a D-sub Cable DVI OUT ( DVI ) AUDIO OUT R-AUDIO-L AUDIO OUT PC OUT Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution is 1920 X 1080 @ 60 Hz. Horizontal Frequency Vertical Frequency Pixel Clock Frequency...
  • Page 27: Network Connection

    Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Connecting to a Wired Network ¦ You can attach your TV to your LAN using cable in three ways: y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable.
  • Page 28 Network Setup 1. Follow Steps 1 through 6 in the “How to set up Network Test automatically” procedure. SWL(Samsung Wireless Link) : Off 2. Set Internet Protocol Setup to Manual. SWL connect 3. Press the ▼ button on your remote to go to the first entry field.
  • Page 29: Connecting To A Wireless Network

    ¦ To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
  • Page 30 The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.
  • Page 31 Network Setup (PBC (WPS)) How to set up automatically To set up the wireless connection automatically, follow these steps: How to set up using PBC (WPS) 1. Follow Steps 1 through 6 in the “How to set up using If your router has a PBC (WPS) button, follow these steps: PBC (WPS)”...
  • Page 32 You can connect to a mobile device without an access point 3. On the dialog that appears, click the Support tab. through the “Samsung Wireless LAN Adapter” by using a 4. On the Support tab, click the Details button. The peer to peer network.
  • Page 33 ID or password when connecting to the Internet. ✎ If a Samsung Wireless LAN Adapter is connected to the The internet connection may fail because of a firewall USB 2 port, the network may not operate normally. We problem.
  • Page 34: Media Play

    PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**) 2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed.
  • Page 35 The Divx DRM, Multi-audio, embedded caption are not supported. ✎ Samsung PC Share manager should be permitted by the firewall programme on your PC. ✎ When you use Media Play mode through a network connection, According to functions of the provided server: The sorting method may vary.
  • Page 36: Screen Display

    ✎ Before formatting your device to the tv, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Playing Recorded TV Program 1. Press the ◄ or ► button to select Recorded TV, then press 00:04:03 / 00:07:38 Movie 01.avi...
  • Page 37 ✎ NOTE Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs, nor can they be played when the main board of the TV is changed. Data broadcasts cannot be recorded. The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the free space on the hard disk drive.
  • Page 38 Advanced Features Videos Playing Video 1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu. 2. Press the ◄/►/▲/▼ button to select the desired file in the file list. 3. Press the ENTERE button or � (Play) button. –...
  • Page 39 H.263 is not supported. • Only Samsung Techwin MJPEG is supported. Playing recorded TV or movie file continuously (Resume Play) If you exit the playing Recorded TV or Videos function, it can be played later from the point where it was stopped.
  • Page 40 Advanced Features Photos Viewing a Photo (or Slide Show) 1. Press the ◄ or ► button to select Photos, then press the Normal Image1024.jpg 1024x768 2010/2/1 3/15 ENTERE button in the Media Play menu. 2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
  • Page 41 Recorded TV/Videos/Music/Photos Play Option menu During playing a file, press the TOOLS button. Category Operations Videos Music Photos Recorded TV Title You can move the other file directly. > > Repeat Mode You can play recorded TV, movie and music files repeatedly. >...
  • Page 42: Anynet

    Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
  • Page 43: Setting Up Anynet

    Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. Recording: (*recorder) Starts recording immediately using the recorder.
  • Page 44: Listening Through A Receiver

    Advanced Features Recording ¦ You can make a recording of a TV programme using a Samsung recorder. 1. Select Recording. ✎ When there are more than two recording devices When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.
  • Page 45: Troubleshooting For Anynet

    ¦ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. •...
  • Page 46: Internet@tv

    Screen Display Recommended TV Screen: Recommended Applications: Displays the current channel. Displays the recommended service by Samsung. You are not able to add or delete a service in this list. Information: My Applications by Date 1/1 Displays notices, new applications, and...
  • Page 47 Account Login ■ System Setup For a application with multiple account, use ◄ and ► to Ticker Autorun (Off / On): Enable/disable ticker autorun access the different account. upon powering on the TV. ✎ The Ticker application provides useful News, Login Weather, and Stock Market information.
  • Page 48: Help Website

    → Consumer → television → Internet@TV Taiwan → 個人消費産品 → 電視 → Internet@TV Thailand → ผลิ ต ภั ณ ฑ์ → โทรทั ศ น์ → Internet@TV Vietnam → sản phẩm nghe nhìn → máy thu hình → Internet@TV South Africa →...
  • Page 49: Allshare

    ✎ For more information, visit “” or contact the Samsung call centre. Mobile devices may Using the Message Function need additional software installation. For details, refer to Using this function, you view call arrivals, SMS messages each device's user’s guide.
  • Page 50 You can also change the setting (or resetting) of this feature at “AllShare Setup”. Using your Samsung phone to control your TV Simply Warning: Please note that if your device is connected to unsecured or unfamiliar network, unwanted or inappropriate contents might be played.
  • Page 51: Other Information

    Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. ✎...
  • Page 52: Assembling The Cables

    Other Information Assembling the Cables Stand Type Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand. Wall-Mount Type ✎ Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals. English...
  • Page 53: Installing The Wall Mount

    For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
  • Page 54: Securing The Tv To The Wall

    Other Information Securing the TV to the wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death.
  • Page 55: Troubleshooting

    If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.,” then click on Support, or contact the call centre listed on the back-cover of this manual.
  • Page 56 If you are using a HDMI connection, check the audio output setting on your PC. Network Connection (Depending on Models) Wireless network connection failed. • Samsung Wireless USB dongle is required to use a wireless network. • Make sure the Network Connection is set to Wireless (p. 29). •...
  • Page 57 • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user doesn’t turn the TV on or off, or adjust the manual for the SAMSUNG TV code. volume. A “Mode Not Supported” message •...
  • Page 58 Other Information Issues Solutions and Explanations The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source (p. 23). The message “Scramble signal” or “Weak • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. Signal/No Signal”...
  • Page 59: Specifications

    HDMI IN 1 ~ 4 Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Analogue audio input (HDMI IN1 only) PC input (HDMI IN1 only) Stand Swivel (Left / Right) -20˚ ~ 20˚ Model Name PS50C7000 PS58C7000 PS63C7000 Screen Size 50 inches 58 inches 63 inches...
  • Page 60: Index

    Other Information Index AllShare Film Mode Receiver Amplify Fine Tune Recording Anynet+ Flesh Tone Remote Control Auto Adjustment Frequency Repeat Mode Auto Volume RGB Only Mode Rotate HDMI 8, 42 Background Music Headphones Balance L/R Home Theatre 9, 42 Select All Basic View Self Diagnosis Batteries...
  • Page 61 This page is intentionally left blank.

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • FARZAD AKHTARI Apr 05, 2015 11:37: