Mercathode Kit (If Equipped) - MerCruiser Vazer 100 Owner's Manual

MerCathode Kit (if Equipped)

Washing the MerCathode assembly can damage components and lead to rapid
corrosion. Do not use any cleaning equipment such as brushes or high‑pressure washers
to clean the MerCathode assembly.
Do not pressure‑wash the MerCathode assembly. Doing so will damage the coating on the
reference electrode wire and decrease the corrosion protection.
The MerCathode is mounted on the boat transom, port and starboard sides of the drive
The system should be tested to ensure adequate output. The test should be performed
where the boat is moored using a Quicksilver Reference Electrode and Test Meter. Contact
your authorized Mercury MerCruiser dealer.
90-899883182 NOVEMBER 2007
a
a - MerCathode anode
NOTICE
b
26236
b - MerCathode reference electrode
Section 5 - Maintenance
Page 91